Designing a LogiCORE PCI Express System

Course Description

Attending the Designing a LogiCORE PCI Express System will provide you a working knowledge of how to implement a Xilinx PCI Express® core in your applications. This course focuses on the implementation of a Xilinx PCI Express system within the Connectivity Targeted Reference Design (TRD). With this experience, you can improve your time to market with your PCIe core design. Various Xilinx PCI Express core products will be enumerated to aid you in selecting the proper solution. This course focuses on the AXI streaming interconnect.

Release Date

October 2012

Level

Connectivity 3

Training Duration

2 days

Who Should Attend?

• Hardware designers who want to create applications using Xilinx IP cores for PCI Express
• Software engineers who want to understand the deeper workings of the Xilinx LogiCORE PCI Express solution
• System architects who want to leverage key Xilinx advantages related to performance, latency, and bandwidth in PCI Express applications

Prerequisites

• Experience with PCIe specification protocol
• Knowledge of VHDL or Verilog
• Some experience with Xilinx implementation tools
• Some experience with a simulation tool, preferably ISim
• Moderate digital design experience

Software Tools

• Xilinx ISE® Design Suite: Logic or System Edition 14.2
• ChipScope™ Pro software 14.2

Hardware

• Architecture: 7 series FPGAs*
• Demo board: Kintex™-7 FPGA KC705 board*

* This course focuses on the 7 series architecture. Check with your local Authorized Training Provider for the specifics of the in-class lab board or other customizations.

Skills Gained

After completing this comprehensive training, you will know how to:

• Construct a basic PCIe system by:
  • Selecting the appropriate core for your application
  • Specifying requirements of an endpoint application
  • Connecting this endpoint with the core
  • Utilizing FPGA resources to support the core
  • Simulating the design
• Identify the advanced capabilities of the PCIe specification protocol and feature set

Course Outline

Day 1

• Introduction to the PCIe Architecture
• Review of the PCIe Protocol
• PCIe and the CORE Generator™ Interface
• Lab 1: Constructing the PCIe Core
• Simulating a PCIe System Design
• Connecting Logic to the Core – AXI Interface
• Packet Formatting Details
• Lab 2: Downstream Port Model Simulation

Day 2

• Endpoint Application Considerations
• Lab 3: Pseudo-Transactional Modeling
• Application Focus: DMA
• Lab 4: Design Implementation
• 7 Series Root Port
• PCIe Configuration
• Compliance and Debugging
• Lab 5: Debugging the PCIe Core with the ChipScope Pro Tools
• Errors and Interrupts
• Appendix: Mechanicals, Hot Plug, and Power
• Appendix: Connecting Logic to the Core – Local Link

Lab Descriptions

• Lab 1: Constructing the PCIe Core – This lab familiarizes you with all the necessary flow of the Xilinx CORE Generator tool for generating a Xilinx LogiCORE Endpoint Block IP. You will select appropriate parameters for the CORE Generator tool and create the PCIe core used throughout the labs.
• Lab 2: Downstream Port Model Simulation – This lab demonstrates how timing and behavior of a typical link negotiation using the ISim tool. You will observe and capture the effects of link training and write packets to the endpoint application for later use.
• Lab 3: Pseudo-Transactional Modeling – This lab illustrates pseudo-transactional modeling, which provides various packets to the user design without the need to simulate the PCIe cores themselves.
• Lab 4: Design Implementation – This lab familiarizes you with all the necessary steps and recommended settings to turn the HDL source to a bitstream.
• Lab 5: Debugging the PCIe Core with the ChipScope Pro Tools – This lab illustrates how to use the ChipScope™ Pro tools to monitor the behavior of the core and the endpoint application for proper operation.

Customer Reviews

• I think the instructor's understanding of the material is excellent, and I was very impressed at his ability to rework the labs "on the fly" to meet the needs of the class.
  
  
  
• I think most courses offered are very good for both customers and young Xilinx engineers. I thought this course was a step forward in the way it involved the class. Maybe this was because there a good mix of customers and Xilinx employees. It was very interactive, and probably difficult to teach with the range of questions that were asked.