The Embedded Design Tutorials compliment the tutorials in the Zynq-7000 All Programmable SoC Concepts, Tools and Techniques Guide. The tutorials presented below showcase the learning provided in our Embedded Systems Design (for Hardware and Firmware Engineers), Embedded Systems Software Design (for Software and Firmware Engineers), and Zynq AP SoC System Architecture (for System Architect) courses. Additional training is available for System Architects, Software Developers, Hardware Designers, and Firmware Developers.
| Running and Debugging a Linux Application on the Zynq Platform - (15.6 MB zip) Demonstrates importing a hardware description into SDK, creating and building a Linux software application, and downloading, debugging, and running software using SDK. |
| Zynq-7000 All Programmable SoC Design Workshop Bare Metal Software Development - (15.6 MB zip) Demonstrates importing a hardware description into SDK, creating and customizing a BSP, and downloading, debugging, and running software using SDK. Profile a simple application to determine where the software is spending its time. Perform on chip debug to observe AXI transactions using ChipScope Pro Analyzer. |
| Zynq-7000 All Programmable SoC Hardware Development - (15.6 MB zip) Demonstrates the recommended embedded design flow for creating an embedded Zynq™ All Programmable SoC system and utilizing peripherals in both the processing system (PS) and programmable logic (PL). |