Solarflare Enhanced PTP Daemon (sfptpd) from Xilinx =================================================== Version: v3.4.1.1000 Overview -------- This package contains a Solarflare Enhanced PTPD (sfptpd) binary compiled for Linux platforms with support for Xilinx PTP adapters Supported hardware platforms ---------------------------- The daemon contained in this package support the following Xilinx adapters: - Xilinx Server Adapters: - Solarflare SFN8522 Dual Port SFP+ Server Adapter (with Plus license) - Solarflare SFN8542 Dual Port QSFP+ Server Adapter (with Plus license) - Solarflare SFN8042 Dual Port QSFP+ Server Adapter (with Plus license) - Solarflare SFN8722 Dual Port SFP+ OCP Server Adapter (with Plus license) - Solarflare XtremeScale X2522 10GbE Adapter (with Plus license) - Solarflare XtremeScale X2522-25 10/25GbE Adapter (with Plus license) - Solarflare XtremeScale X2541 Single Port 10/25/40/50/100GbE Adapter (with Plus license) - Solarflare XtremeScale X2542 Dual Port 10/25/40/50/100GbE Adapter (with Plus license) - OEM Server Adapters: - HP 570FLB Dual-Port 10GbE FlexibleLOM Server Adapter (with Precision Time license upgrade) - HP 570M Dual-Port 10GbE Mezzanine Server Adapter (with Precision Time license upgrade) - The following non-Xilinx adapters have been found to work. Support for these is best-effort. Kernel and driver updates may be needed. Registered Trademarks acknowledged: - Broadcom BCM5719 - Intel 82580 - Intel I2190-LM - Intel X540-AT2 - Mellanox CX4 MT27700 The latest versions of drivers and firmware for Xilinx adapters can be downloaded from under the Linux category. Linux distribution support -------------------------- This package is supported on: - Red Hat Enterprise Linux 6.10 - Red Hat Enterprise Linux 7.8 - 7.9 - Red Hat Enterprise Linux 8.1 - 8.5 - SuSE Linux Enterprise Server 12 sp4 and sp5 - SuSE Linux Enterprise Server 15 sp1 and sp2 - Canonical Ubuntu Server LTS 18.04, 20.04 - Debian 10 "Buster" - Debian 11 "Bullseye" - Linux kernels 3.0 - 5.10 Documentation ------------- For detailed instructions on how to use the sfptpd with Solarflare adapters please refer to the "Solarflare Enhanced PTP User Guide" (part number SF-109110-CD) which is available as a PDF from . Support ------- Please contact your local Xilinx NIC support representative or email . Known Limitations ----------------- Issue SWNETLINUX-78 ~ If the firmware is upgraded using sfupdate while sfptpd is running, sfptpd will stop working. Xilinx recommends that sfptpd is stopped prior to performing a firmware upgrade on an adapter. Issue SWNETLINUX-4466 (Service Knowledge article 000033083) ~ With affected driver versions PPS is not functional unless a PTP instance is also defined. This may be worked around with a dummy PTP instance. See article for details. Changelog --------- ### v3.4.1.1000 Feature: ~ Allow PTP as PPS time-of-day source (SWPTP-1163) A single sync instance can be specified in a global PPS section, e.g.: [pps] time_of_day ptp1 Issue SWPTP-1172 ~ Handle reference clocks and unreachable peers reported by chronyd suitably rather than crashing with an assertion failure Issue SWPTP-424 ~ Propagate time and frequency traceability flags from PPS to PTP ### v3.4.0.1003 Major features: ~ Add simple clustering algorithm between sync instances (SWPTP-421). In this mode a passive sync instance (e.g. NTP) is designated as the 'discriminator' between multiple active sync instances (e.g. PTP) to allow wildly divergent time sources to be excluded in sync instance selection. N.B. while similar to the sfptpd Best Master Clock (BMC) Discriminator feature this operates between sync instances (on separate PTP domains and/or interfaces) rather than within a PTP domain and is a preferable solution because full clock reconstruction is continuously performed for each candidate source. Example configuration for preferring instances within 100ms of NTP ref: [general] clustering discriminator ntp1 100000000 1 ~ Extend interoperability with chronyd (SWPTP-978). Support chronyd as NTP server when either sfptpd or chronyd is statically configured not to discipline the system clock. For example, to enable the chronyd + PPS use case launch chronyd with the '-x' option. ~ Support the draft PTP Enterprise Profile (SWPTP-975). Suitable defaults and configuration constraints can be selected by using the following option, which should appear before other options. [ptp] ptp_profile enterprise See https://datatracker.ietf.org/doc/html/draft-ietf-tictoc-ptp-enterprise-profile-21 ~ Support the IEEE1588-2019 revision of the PTP standard (SWPTP-591). Implementations of the 2019 revision, known informally as PTP v2.1, should be backwards compatible with implementations of the 2008 revision (v2.0) but to assure continued interoperability with intolerant peer devices the protocol version must be specified to use new features, such as the COMMUNICATION_CAPABILITIES TLV: [ptp] ptp_version 2.1 ~ Support for the IPv6/UDP PTP transport (annex E) (SWPTP-601). The link-local and global scopes are supported. Example configuration: [ptp] transport ipv6 scope link-local Minor features: ~ Add probe-only interface detection mode to avoid Netlink (SWPTP-1145): hotplug_detection_mode probe ~ Raise alarm on secondary servos that fail to operate continuously for 30 seconds or more such as due to clock comparison failure. (SWPTP-1049). ~ Use COMMUNICATIONS_CAPABILITIES TLV to agree multicast vs unicast delay request capabilities with corresponding PTP node (SWPTP-687). ~ Extend application of 'epoch guard' for hosts with multiple NICs. (SWPTP-1109) ~ Convert example scripts to python 3 (SWPTP-957). ~ Report outlier statistics in long term stats. NB frequent outliers are always expected as this is intrinsic to the adaptive algorithm. (SWPTP-540). Issue SWPTP-1098, SWPTP-1102 ~ Fix clock_readonly option. Issue SWPTP-1091 ~ Correct handling of timestamp when Follow_Up messages received or handled ahead of Sync, occasionally resulting in large time jumps. Issue SWPTP-1078 ~ Fix invalid JSON in real time stats output. Issue SWPTP-895 ~ Serialise log rotation with log writing to avoid broken output. Issue SWPTP-844, SWPTP-1150 ~ Fix association of PTP sync instances to interfaces when there are multiple instances on multiple interfaces so that correct operation is no longer sensitive to ordering in configuration. ### v3.3.1.1001 Features: ~ New step-on-first-lock clock control mode (SWPTP-1032) Add mode to allow clock steps after first lock onto a PTP master. This mode addresses the unintuitive behaviour of step-at-startup when there are multiple local clocks that have already been slewing to NIC. ~ Configurable bond/hotplug detection mode (SWPTP-1041) Add option to detect bond changes only via netlink events to avoid expensive polling of bond state when teamd in use. Enable with 'hotplug_detection_mode netlink'. Issue SWPTP-1002 ~ Propagate TIME_TRACEABLE flag when acting both as master and slave Issue SWPTP-1005 ~ Consider UTC offset in advertisement when computing BMC discriminator offset Issue SWPTP-1037 ~ Correct handling of cached Follow_Up messages received ahead of Sync ### v3.3.0.1007 Feature Release Features: ~ BMC Discriminator (SWPTP-906) Provide option to disqualify PTP masters which advertise a time that differs by more than a given threshold from a specific time source such as the selected NTP server. ~ Hybrid Network Mode Without Fallback (SWPTP-684) Provide a new mode for DelayReq/DelayResp messaging that does not fall back to multicast when there is no response. ~ Freerun with System Clock (SWPTP-884) Allow the system clock to be used as the clock source with the freerunning sync module. In combination with other options this enables sfptpd to operate alongside chronyd for some use cases. ~ Epoch Guard (SWPTP-908) Detect when a local clock has been reset to 1970, e.g. on an unexpected NIC reset and raise an alarm, prevent it being used to synchronise other clocks (default behaviour) and/or step it immediately. ~ Chronyd (SWPTP-565) Support limited use cases where sfptpd operates alongside chronyd with read-only access to the system clock. Due to chronyd not supporting external control of whether it disciplines clocks it is still recommended to disable chronyd and install ntpd where NTP functionality is desired. ~ Systemd example (SWPTP-536) Install a systemd unit file to start sfptpd instead of a sysv-style initscript and an example configuration file suitable for passive operation alongside chronyd. ~ Configurable state path (SWPTP-909) Provide 'state_path' option to change the location of sfptpd state files. ~ Slave UTC override option (SWPTP-726) A new option 'ptp_utc_offset_handling override ' uses a fixed UTC offset of N seconds regardless of any offset announced by PTP masters. This option aids interoperability with faulty GMs but requires manual intervention to handle leap seconds. ~ Log sync instance alarm changes (SWPTP-988) Any change in alarms or lack of alarms is shown in the message log. Issue SWPTP-984 ~ Avoid stale offsets in text stats when sync instance leaves slave state Issue SWPTP-968 ~ Apply a minimum logging level with '-v' rather than overriding trace_level Issue SWPTP-916 ~ Permit DelayReq intervals of up to 32s to match the default profile range Issue SWPTP-902/88775 ~ Ensure pipes are always sized sufficiently for message queues Issue SWPTP-896/88291, SWPTP-892/87934 ~ Abort startup if kernel not built with PHC support Issue SWPTP-876/84990 ~ Fix late message handling by rate-limiting probing for bond/team updates Issue SWPTP-866/82382 ~ Fix VPD access failures by prefering to read VPD from PCIe config space Issue SWPTP-851/79031 ~ Fix an issue where the NTP module would hang if an application other than chronyd opened UDP port 323. ("Failed to allocate message" symptom.) ~ Add additional tracing options for threading module. Issue SWPTP-840/78802 ~ Use clearer log message for pending sync instance selection Issue SWPTP-837/78323 ~ Accept FollowUp messages received before their corresponding Sync message Issue SWPTP-708/72389, SWPTP-893/87987 ~ Fix consequences of NIC reset with new 'epoch guard' feature SWPTP-908 above Issue SWPTP-792/74449 ~ Fix hotplug handling of interface renaming Issue SWPTP-610/70128 ~ Create state path directory before opening message log, allowing the mesage log to be created in the same directory (not recommended). ### v3.2.6.1003 Feature Release Features: ~ Statistics. Include time of minimum and maximum for each statistics time range. ~ Sync Instance Selection. Provide option to specify the initial sync instance to be selected using the 'manual-startup' mode of the 'selection_policy' directive. Issues 77818/76890 ~ Bonding. Fix issue where use of ifdown/ifup scripts on a bond can cause sfptpd to exit. Issues 76886/67823 ~ PTP. Only raise a DelayResp alarm if three consecutive DelayResps fail to be received. Issue 76096 ~ Emit a warning if sfptpd detects that it's been descheduled for too long. Issue 76086 ~ Allow clock names (e.g. phc0) to be used in the 'clock_list' directive. Issue 75041 ~ Emit a warning at startup if the kernel's current clocksource is not TSC. Issue 74320 ~ Refuse to start sfptpd if multiple instances are using software timestamping. Use of software timestamping is not compatible with multiple instances. Issue 74104 ~ Fix logging issue when a sync instance is selected where the wrong decisive rule can be reported in some circumstances. Issue 73605 ~ NTP. Allow startup if ntpd is disciplining the system clock, but the 'clock_list' configuration directive doesn't include 'system'. Issue 71479 ~ PTP. Refuse to start if interface has no IP address configured. Issue 70876 ~ Include instance name in state files. ### v3.2.5.1000 Issue 78221: ~ Bonding. Fix issue where after a bonding failover the multicast TTL value is not re-initialised correctly. Issue 76542: ~ PPS. Fix issue where PPS statistics are missing from the PTP long-term stats log when pps logging enabled. Issue 76029: ~ Fix issue that causes the daemon to crash at startup when the clock_list option is used to specify a list of clocks to be disciplined that does not include the system clock. ### v3.2.4.1000 Issue 77369: ~ Multiple PTP instances. Fix issue that can cause PTP traffic to be received by the wrong PTP instance when an interface is taken down and the IP address removed. ### v3.2.3.1000 Issue 75431: ~ Bonding. Fix issue where sfptpd does not detect interfaces in a bond being brought up or taken down using ifup/ifdown. ### v3.2.2.1000 Issue 73989: ~ Fix issue that can cause PHC API to be used when not ready. Issue 73875: ~ Fix issue that can cause incorrect times to be recorded in log messages. ### v3.2.1.1004 Feature Release Feature release of sfptpd. Includes the following features: * Slave event & status reporting via TLVs with remote monitor (EXPERIMENTAL). * Support for non-Solarflare NICs (EXPERIMENTAL). * Clock-ctrl-failure alarm added for primary and secondary servos. * Machine-readable local logging: JSON-format long term stats files automatically created; To enable JSON Lines stats logging use the option: json_stats * Support for Meinberg NetSync Monitor extension including MTIE reporting. To enable NetSync use the option: mon_meinberg_netsync * Recording of the times of maximum and minimum events in long term stats along with qualification status. * Configurable automatic sync instance selection policy and improved logging of decisive factor for selection of a new sync instance. * Support for NICs to be inserted and removed at runtime when running sfptpd over a bond. Issue 71792 ~ Record Announce intervals received from Foreign Masters when in the PTP_LISTENING state and use the longest to determine Foreign Master Record expiry rather than using the default Announce interval. Issue 71508 ~ Fix error in estimated accuracy of NTP synchronization that could cause NTP to be incorrectly selected in preference to PTP. Issue 71397 ~ New allow-deny, deny-allow ACL order options match behaviour of ptpd2 and Apache webserver ACLs. Old permit-deny, deny-permit ACL orders have the opposite behaviour and are deprecated but get translated. Issue 71264 ~ Write log files atomically so that they never appear empty when read. Issue 70616 ~ Support NTP mode 6 communications (ntpq) in addition to mode 7 (ntpdc). Issue 69725 ~ Fix issue that causes a crash if IPv6 NTP peers are found. Issue 68960 ~ Check whether chronyd is running when sfptpd is started. Issue 61820 ~ Fix issue that can occasionally cause a crash on receipt of a signal. ### v3.0.1.1004 Issue 71252 ~ Fix issue that causes the old adapter clock continue to be used as the Local Reference Clock when an active-backup bond fails over to an interface associated with a different clock. Issue 70127 ~ Fix issue that can cause sfptpd to become unresponsive when socket communications between sfptpd and the NTP daemon timeout e.g. due to an IP Table rule that causes traffic to the NTP daemon to be dropped. Issue 70328 ~ New configuration option "ptp_delay_resp_ignore_port_id" to allow sfptpd to interoperate with switches that don't correctly implement boundary clock support when used with LACP. Issue 69699 ~ Fix reversed display of NTP peer IP addresses. Issue 69424 ~ Fix interoperability issue with masters that don't go passive, e.g. FsmLabs GM. Issue 69299 ~ Fix file attributes (user, group) in RPM packages. ### v3.0.0.1033 Feature Release Feature release of sfptpd. Includes the following features: * Support for PTP multiple masters * Support for NTP fallback * Improved timestamp filtering and rejection * Configurable synchronization thresholds for the PTP, PPS and local clock servos in order to better interoperate with less accurate time sources. * New control utility for selecting sync instances in manual selection mode, triggering log rotation and causing clocks to be stepped. Issue 66361 ~ Fix issue that causes sfptpd to refuse to start when operating in freerun NTP mode and FsmLabs Timekeeper is used as the NTP Daemon. Issue 64057 ~ Fix issue that can cause a segmentation fault on account of the incorrect handling of management messages containing GET requests. ### v2.4.0.1000 Feature Release Solarflare Enhanced PTP Daemon (sfptpd) includes support for LACP bonds and also provides a configuration option to select which clocks are disciplined by the daemon. Issue 60672 ~ Fix issue that causes the default configuration in /etc/sfptpd.conf to be overwritten when upgrading the sfptpd RPM package. Issue 60416 ~ Fix issue that can cause a memory leak when PTP Management messages are received by the daemon but not rejected. Issue 57262 ~ Fix issue that can cause sfptpd to fail to start if NTPd has no peers. This can occur during NTPd startup if the NTPd is unable to quickly resolve the DNS names of the peers. Issue 53399 ~ Fix issue that causes sfptpd to disable timestamping on non-Solarflare adapters when the daemon exits. Issue 46699 ~ Fixed handling of logMessageInterval field in unicast PTP messages Issue 45906 ~ Fix issue then can cause sfptpd to fail to start if a physical interface exists that does not have a permanent MAC address. Issue 33716 ~ The ptp_delay_discard_threshold option does not function correctly and support has been removed from this release. ### v2.2.4.70 Issue 48359 ~ Improve filtering and rejection of spurious PPS events by adding a configurable outlier filter based on deviation from the mean. Add bad PPS signal alarm and statistics to count outliers. Issue 46699 ~ Fixed handling of logMessageInterval field in unicast PTP messages ### v2.2.2.60 Issue 45921 ~ Fixed issue that prevented the daemon being used in software timestamping mode with some non-Solarflare adapters. Issue 45913 ~ Fixed issue that did not allow the daemon to be used with locking disabled Issue 45906 ~ Improved interface parsing to ignore non-ethernet devices ### v2.2.1.58 Feature Release Solarflare Enhanced PTP Daemon (sfptpd) GA feature release including support for Flareon network adapaters SFN7142Q (requires Precision Time license). New features: ~ Support for synchronizing to a PPS source using NTP to provide Time-of-Day ~ Support for PTP management messages ~ Access control lists for timing and management messages ~ Clock control option to allow clocks to be stepped forwards only ~ Configurable UTC offset valid handling for improved interoperability ~ Configuration option to ignore lock file. ~ Integration of changes from sourceforge PTPD2 project v2.3 Improved diagnostics including: ~ Report of PTP and timestamping capabilities of each host interface ~ Detection of Transparent Clocks ~ Reporting the set of PTP clocks active in the network ~ Reporting the active PTP domains Issue 45758 ~ Fixed data sharing violation that could potentially result in stack corruption and cause the daemon to crash. Issue 44508 ~ Fixed issue that can cause the daemon to fail to correctly reconfigure SFN6322F/SFN5322F adapters following an abnormal shutdown. Issue 42473 ~ Fixed issue that can cause the daemon to crash if run on a system containing a Solarflare 4000 series adapter. Issue 42454 ~ Fixed issue that resulted in lock file having non-standard contents when operating in daemon mode. Issue 41245 ~ Add configuration option to allow more than one instance of sfptpd to be run simultaneously. Issue 41222 ~ Improved detection of whether sfptpd is already running: ignore scripts with the same name Issue 41210 ~ Fixed race condition in daemonize operation that can cause lock file relocking to fail on some systems ### v2.1.0.34 Issue 41057 ~ Fix issue that can cause frequency correction and state files to be written at every sync interval. ### v2.1.0.33 Solarflare Enhanced PTP Daemon (sfptpd) GA release including support for Flareon network adapaters SFN7322F and SFN7122F (SFN7122F requires AppFlex license). Improved diagnostics and error reporting including: ~ Reporting of current clock offsets and error conditions in the topology file ~ Detection of missing Sync, FollowUp and DelayResponse messages ~ Colour coding of statistics output to indicate error conditions ~ Configuration option to run as a daemon New features: ~ Enable receive packet timestamping on a set of interfaces ~ Optionally leave timestamping enabled when daemon exits ~ Specify reference clock in freerun mode Issue 40507 ~ Improve detection of other running time services (ntpd, ptpd, sfptpd). Previous implementation matched any process command line containing one of the strings. Issue 36755 ~ Disabled PTP Management support. In the previous version some Management message support was unintentionally enabled. Issue 35966 ~ Fixed PPS statistics logging. Propagation delay should be subtracted rather than added to PPS offset. Issue 35558 ~ Update topology and state files immediately if any of the PTP parent parameters change. Issue 35147 ~ Added fault restart timer to avoid high CPU usage on continuous fault e.g. if driver unloaded. Issue 34587 ~ Modified timestamp retrieval to detect and differentiate between different failure modes. Ensure correct handling of socket errors in all cases. ~ Modified mechanism to retrieve transmit timestamps to reduce CPU usage in the case where the timestamp is returned late or not returned at all. ### v2.0.0.23 Issue 35391 ~ Fixed interoperability issue with Boundary Clocks Issue 34693 ~ Added configuration file option "message-log" to allow messages to be logged to file in addition to statistics. Improved log rotation to make it behave more conventionally. Issue 34445 ~ Fixed issue where sfptpd did not correctly detect and warn if driver version too old. Issue 34099 ~ Improve mean path delay when master to slave propagation delay is small. If calculated mean path delay is negative value, use 0 rather than previous value. ### v2.0.0.17 Solarflare Enhanced PTPd (sfptpd) GA Release including: ~ Support for PTP over VLANs ~ Support for PTP over bonded interfaces ~ Support for PTP Hybrid Mode (mixed multicast/unicast) ~ Synchronization of multiple PTP capable NICs ~ File based configuration ~ Saved frequency correction information ~ Short and long term statistics collection Copyright --------- Please see LICENSE included in this distribution for terms of use. Certain files intended as examples for customisation by users are licensed with the BSD 2-clause licence. Such files are identified with an SPDX tag. This binary includes a modified version of the PTP sourceforge project available at http://ptpd.sourceforge.net/. The PTPD2 software is distributed under a BSD-style license available in the file PTPD2_COPYRIGHT. The version sourced is ptpd v2.3. This binary includes part of ntpd to implement the mode 6 NTP query protocol; this is distributed under the NTP license available in the file NTP_COPYRIGHT.html. The version sourced is ntp-4.2.6p5.