This README contains installation instructions for 32-bit hardware server included in this package. Note: -The package includes 32-bit version of hw_server and necessary JTAG cable drivers for both Linux and Windows. -The package does NOT include Vivado Design Suite. -The package does NOT include an installer. Follow the steps below to install and run the 32-bit version of hardware server: Before proceeding, you MUST disconnect all Xilinx Platform Cable USB II cables. Windows: 1) Unzip the package on your machine (e.g. c:\Xilinx) 2) Install cable drivers by executing the install_drivers_wrapper.bat from /data/xicom/cable_drivers/nt You MUST install the driver files with the admin privileges (i.e. Run as administrator). You can check install_drivers_wrapper.log to verify cable driver installation. 3) Invoke hw_server.bat from /bin folder Linux: 1) Unzip the package on your machine 2) Install cable drivers by executing install_drivers from /data/xicom/cable_drivers/lin/install_script/install_drivers You MUST install the driver files with the admin privileges. 3) Invoke hw_server from /bin folder