Creating a Project to Run the Example

  1. Select File > New > Xilinx SDx Project.
  2. Specify the name of the project (for example, lab9) in the Project name field. Click New.
  3. From the Platform list select zc702. Click Next.
  4. From the System Configuration drop-down list, select Linux. Click Next.
  5. From the list of application templates, select Array Partitioning and click Finish.
  6. Click on the tab labeled lab9 to select the SDx Project Settings (if the tab is not visible, double click the project.sdx file in the Project Explorer). In the HW functions panel observe that the matmul_partition_accel function is marked as a hardware function when the project was created.
  7. If the hardware functions were removed or not marked, click on the Add HW Functions icon to invoke the dialog box to specify hardware functions.
  8. Click the Build icon on the toolbar to build the project.