Program FPGA

Program the FPGA with the bitstream.

The table below lists the options available on the Program FPGA dialog box:



Hardware Configuration

Specify the Bitstream and BMM files. These are provided by Vivado® when you export your hardware design to SDK.

Bitstream File

In this field, specify the FPGA Bitstream.

BMM File

In this field, specify the BMM file.

Software Configuration

Specify the program that is initialized at the reset start address for each processor in the Block RAM.


Name of the Processor in the System.

ELF file

Specify the ELF file to initialize.


Click this button to program the FPGA.