Creating a Standalone Application Project

You can create a C or C++ standalone application project by using the New Application Project wizard.

To create a project:

  1. Click File > New > Application Project. The New Application Project wizard appears.
    Note: This is equivalent to clicking on File > New > Project to open the New Project wizard, selecting Xilinx > Application Project, and clicking Next.
  2. Type a project name into the Project Name field.
  3. Select the location for the project. You can use the default location as displayed in the Location field by leaving the Use default location check box selected. Otherwise, click the check box and type or browse to the directory location.
  4. Select Create a new platform from hardware (XSA). The Vitis IDE lists the all the available pre-defined hardware designs.
  5. Select any one hardware design from the list and click Next.
  6. From the CPU drop-down list, select the processor for which you want to build the application. This is an important step when there are multiple processors in your design. In this case you can either select psu_cortexa53_0 or psu_cortexr5_0.
  7. Select your preferred language: C or C++.
  8. Select an OS for the targeted application.
  9. Click Next to advance to the Templates screen.
  10. The Vitis software platform provides useful sample applications listed in the Templates dialog box that you can use to create your project. The Description box displays a brief description of the selected sample application. When you use a sample application for your project, the Vitis software platform creates the required source and header files and linker script.
  11. Select the desired template. If you want to create a blank project, select Empty Application. You can then add C files to the project, after the project is created.
  12. Click Finish to create your application project and board support package (if it does not exist).
    Note: Xilinx recommends that you use the managed make flow rather than standard make C/C++ unless you are comfortable working with Makefiles.