UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Digilent Zybo Zynq-7000 ARM/FPGA SoC Trainer Board

  • Price: $189
  • Part Number: 410-279
  • Device Support:
  • Vendor: Digilent, Inc.
  • Program Tier: Member

Product Description

The Zybo (Zynq™ Board) is a feature-rich, ready-to-use, entry-level embedded software and digital circuit development platform built around the smallest member of the Xilinx Zynq-7000 family, the Z-7010. The Z-7010 is based on the Xilinx® All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series field programmable gate array (FPGA) logic. When coupled with the rich set of multimedia and connectivity peripherals available on the Zybo, the Zynq Z-7010 can host a whole system design. The on-board memories, video and audio I/O, dual-role USB, Ethernet and SD slot will have your design up-and-ready with no additional hardware needed. Additionally, six Pmod connectors are available to put any design on an easy growth path. The Zybo provides an ultra-low cost alternative to the ZedBoard for designers that don't require the high-density I/O of the FMC connector, but still wish to leverage the massive processing power and extensibility of the Zynq AP SoC architecture.


Key Features and Benefits

  • 128 Mb Serial Flash w/ QSPI interface
  • 16-bits per pixel VGA output port
  • 240 KB Block RAM
  • 28,000 logic cells
  • 512 MB x32 DDR3 w/ 1050Mbps bandwidth
  • 650 MHz dual-core Cortex™-A9 processor
  • 80 DSP slices
  • Audio codec with headphone out, microphone and line in jacks
  • DDR3 memory controller with 8 DMA channels
  • Dual-role (Source/Sink) HDMI port
  • External EEPROM (programmed with 48-bit globally unique EUI-48/64™ compatible identifier)
  • GPIO: 6 pushbuttons, 4 slide switches, 5 LEDs
  • High-bandwith peripheral controllers: 1G Ethernet, USB 2.0, SDIO
  • Low-bandwidth peripheral controller: SPI, UART, I2C
  • OTG USB 2.0 PHY (supports host and device)
  • On-board JTAG programming and UART to USB converter
  • On-chip dual channel, 12-bit, 1 MSPS analog-to-digital converter (XADC)
  • Six Pmod ports (1 processor-dedicated, 1 dual analog/digital)
  • Trimode (1Gbit/100Mbit/10Mbit) Ethernet PHY
  • Xilinx Zynq-7000 (XC7Z010-1CLG400C)
  • microSD slot (supports Linux file system)

What's Included

  • Rugged plastic case
  • Zynq-7000 FPGA board

Featured Documents

Page Bookmarked