UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10521

9.1 Incremental Design, LogiCORE PCI/PCI-X - Are the LogiCORE PCI and PCI-X supported in the Incremental Design flow?

Description

Are the LogiCORE PCI and PCI-X cores supported in the Incremental Design flow?

Solution


The LogiCORE PCI and PCI-X are not supported in Incremental Design. This is because of the cores' use of -gm exact guide mode, rather than -gm incremental guide mode.



Incremental Design must guide the unchanged Logic using -gm incremental, while the PCI Core must guide certain nets using -gm exact. Running two guide modes simultaneously is not supported in the software at this time. PCI and PCI-X LogiCORE support are planned for a future release.
AR# 10521
Date Created 08/29/2007
Last Updated 12/08/2011
Status Active
Type General Article