UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1065

XC3000/XC4000/XC5200: How to select cmos input thresholds for FPGAs

Description

Keywords: THRESHOLD, TTL, CMOS, INPUTS, FPGAs

The input thresholds for FPGAs can be set to either CMOS
or TTL (TTL is the default)

The setting is a globally selectable input threshold
(all CMOS or all TTL), selectable when you run makebits.
If you type "makebits -h", you will see two ways of doing this :

-c

or

-f Input: CMOS

Solution

FROM DOS:

For 2000 and 3000 use:
makebits -c

For 4000 and 5200 use:
makebits -f inputs:cmos

IN WINDOWS DESIGN MANGER 6.0
select Design -> implement -> configuration, edit template
then click on cmos under inputs threshold:

AR# 1065
Date Created 08/31/2007
Last Updated 10/01/2008
Status Archive
Type General Article