UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10696

LogiCORE DA FIR - Distributed Arithmatic FIR Filter : ERROR: Customization prameter rule checks failed. Decimation Filter must have sample rate change 2..8

Description

Keywords: CORE Generator, COREGen, DA FIR, distributed, arithmetic, FIR, filter, decimation,
sample, rate, customization, parameter, rule, checks, failed, SimGenerator

Urgency: Standard

General Description:
When generating CORE Generator Distributed Arithmetic FIR Filter v4_0, I encounter the
following error:

ERROR: Customization parameter rule checks failed.
Terminating core elaboration: Decimation filter must have a sample
rate change in the range 2..8 and not 1.
ERROR: SimGenerator: Failure to set Sim customization parameters
for core Distributed_Arithmetic_FIR_Filter
ERROR: Elaboration failure for core Distributed_Arithmetic_FIR_Filter
ERROR: Elaboration of core Distributed_Arithmetic_FIR_Filter failed.

Solution

For a certain type of DA FIR, selecting "1" for Sample Rate Change will cause
this error. Choose the appropriate Sample Rate Change as indicated in the
error message.

This is a GUI problem and will be fixed in CORE Generator update release
3.1i IP Update #3.
AR# 10696
Date Created 12/27/2000
Last Updated 11/25/2002
Status Archive
Type General Article