UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 1100: XC4000E: What is state of RAMs upon power-up/configuration?

AR# 1100

XC4000E: What is state of RAMs upon power-up/configuration?

Description

RAMs (as well as ROMs) are initialized at power-up of the device
in the xc4000E devices.

By default, all RAM/ROM contents are initialized to all zeros.
The initialization values may be defined by the user by attaching
an INIT attribute to the RAM (or ROM) symbol:
INIT=value
where value is the hexidecimal initialization value.

Note that RAM initialization occurs only during configuration.
RAM content is not affected by the Global Set/Reset.

Solution

AR# 1100
Date 03/03/2004
Status Archive
Type General Article