We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 11123

3.1i Virtex-E MAP - MAP crashes after printing message "Running directed packing..." (Solaris)


Keywords: MAP, Solaris, WorkStation, workstation, crash, core dump

Urgency: Hot

General Description:
Cases have been seen where MAP crashes after printing the message,
"Running directed packing...". This is a Solaris-only crash that occurs when
the packer is printing a valid error message regarding standard I/O components
being LOC'd to GCLKIOB sites.

NOTE: This problem also affects Virtex and Spartan-II parts.

On PCs, the valid error message is correctly displayed:

ERROR:Pack:683 - Unable to pack the following symbols concurrently into an
empty I/O component:
PAD symbol "fcs1_rx_clk.PAD" (Pad Signal = fcs1_rx_clk)
BUF symbol "fcs1_rx_clk_ibuf" (Output Signal = fcs1_rx_clk_c)
The symbol fcs1_rx_clk.PAD has a constraint (LOC=(null)) that specifies an
illegal physical site for the component. Please correct the constraint value.


This problem will be fixed in 3.1i Service Pack 8, which is currently scheduled for
release in April 1, 2001.
AR# 11123
Date 08/19/2002
Status Archive
Type General Article