UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11880

3.1i Project Navigator: Dr.Watson on jhdparse.exe - Exception:access violation (0xc0000005), Address: 0x00416146

Description

Keywords: Project Navigator, Dr.Watson, jhdparse, 0xc0000005, 0x00416146

Urgency: Standard

General Description:
When I attempt to open a project, save an existing Verilog source, or synthesize Verilog code, the following Dr. Watson error message appears:

An application error has occurred and an application error log is being generated
jhdparse.exe
Exception:access violation (0xc0000005), Address: 0x00416146

In the Project Navigator GUI, the last line in the transcript window will be:
Done: failed with exit code: 0003

Solution

This error will occur if there are lines in which the wrong tick symbol is used in the Verilog source code.

For example:
assign A = 4`hZZZZ; (This will generate an error.)
assign A = 4'hZZZZ; (This will not generate an error.)
AR# 11880
Date Created 06/29/2001
Last Updated 09/09/2002
Status Archive
Type General Article