UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12050

11.1 Constraints - Can I specify the use of the DCI component in the User Constraints File (UCF)?

Description

Can I specify the use of the DCI component using the IOSTANDARD constraint in the UCF?

Solution

Yes. This can be done in exactly the same way that an I/O standard is specified in the UCF, as illustrated in the following example: 

 

NET "example" IOSTANDARD = LVDCI_33;

AR# 12050
Date Created 08/29/2007
Last Updated 03/03/2014
Status Archive
Type General Article