UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12115

4.1i Constraints Editor - BRAM enable nets do not appear under "Enable Nets"

Description

Urgency: Standard

General Description:

My design contains four different enable nets for the BRAM, but none of them appear when I use the "Enable Nets" filter in the TNM_NET dialog.

Solution

To work around this, manually enter the enable nets into the desired timing constraints.

This will be fixed in the next major software release.

AR# 12115
Date Created 08/29/2007
Last Updated 01/18/2010
Status Archive
Type General Article