UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12243

4.1i XPLA3 CPLDFit - The fitter report shows that too many pins are used

Description

Keywords: 4.1i, XPLA3, report, pin

Urgency: Standard

General Description:
The fitter report shows that too many pins have been used, even to the point where device limits may be exceeded.

Solution

The fitter report is incorrectly counting I/O pins twice. (The I/Os on the pin-out are accurate.)

This problem is fixed in the latest 4.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates.
The first service pack containing the fix is 4.1i Service Pack 1.
AR# 12243
Date Created 08/01/2001
Last Updated 08/05/2003
Status Archive
Type General Article