UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12250

4.1i Project Navigator - "ERROR:IBISWriter:35 - A -g option value is required for XC9500XL."

Description

Keywords: 4.1i, Project Navigator, IBISWriter, XC9500, XC9500XL

Urgency: Standard

General Description:
When I attempt to generate an IBIS model for any XC9500, XC9500XL or XC9500XV device, a message similar to the following appears:

"Starting: 'exewrap -tapkeep -mode pipe -command ibiswriter mydesign.pnx mydesign.ibs'

ERROR:IBISWriter:35 - A -g option value is required for XC9500XL."

Solution

This is fixed in the 5.1i software.

IBIS files are available for download from the Xilinx web site at:
http://www.xilinx.com/support/sw_ibis.htm
AR# 12250
Date Created 08/02/2001
Last Updated 08/05/2003
Status Archive
Type General Article