UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 12650: 6.x SYNPLIFY - "ERROR:NgdBuild:604 - logical block 'comp_name' with type 'primitive' is unexpanded. Symbol 'primitive' is not supported in target 'xxx'."

AR# 12650

6.x SYNPLIFY - "ERROR:NgdBuild:604 - logical block 'comp_name' with type 'primitive' is unexpanded. Symbol 'primitive' is not supported in target 'xxx'."

Description

Keywords: XPLA, Synplify, error, 604, logical block, unexpanded, NGDBuild, Synplicity, CoolRunner, CoolRunner-II, CoolRunner II

Urgency: Hot

General Description:
After I create an EDIF netlist in Synplify for an XPLA3/CoolRunner/CoolRunner-II and port it to the 4.1i EDIF, the following error occurs:

"ERROR:NgdBuild:604 - logical block 'comp_name' with type 'primitive' is unexpanded. Symbol 'primitive' is not supported in target 'xpla3'."

(This problem affects releases 6.2.x - 7.0; it was fixed in version 7.1.)

Solution

To avoid this problem, run Synplify in stand-alone mode, and target an XC9500 device. Create an EDIF flow project in Project Navigator, selecting the appropriate XPLA3/CoolRunner/CoolRunner-II device.
AR# 12650
Date 10/20/2005
Status Archive
Type General Article

By using this website, I accept the use of cookies.   Learn more

Page Bookmarked