UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 13260: 4.1is2 iMPACT - When I add a PROM device in iMPACT batch mode, iMPACT begins to load the .mcs file, then crashes.

AR# 13260

4.1is2 iMPACT - When I add a PROM device in iMPACT batch mode, iMPACT begins to load the .mcs file, then crashes.

Description

General Description:

When I add a PROM device in iMPACT batch mode, iMPACT begins to load the .mcs file, then crashes.

Solution

This will happen if you use incorrect syntax when adding a PROM device. The correct syntax is:

addDevice -p [n] -sprom [prom_part_name] -file [filename.mcs]

For more information on iMPACT batch mode syntax, please consult the Xilinx online software documentation.

AR# 13260
Date 12/15/2012
Status Active
Type General Article