UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14379

4.2i Virtex-II PAR - "FATAL_ERROR:Route:basrtsanity.c:244:1.8 - Process will terminate."

Description

Keywords: Guide, modular, placer

Urgency Standard

General Description:
The Virtex-II placer is not correctly prohibiting potential placement sites that contain route-thru's. This failure results in the following error after placement:

"FATAL_ERROR:Route:basrtsanity.c:244:1.8 - Process will terminate."

NOTE: This Answer Record is only a good match for your problem if it involves a Virtex-II design that contains pre-existing routing before placement (guide, modular) and the failure occurs after placement but before routing.

Solution

This problem is fixed in the latest 4.2i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.2i Service Pack 2.
AR# 14379
Date Created 08/29/2007
Last Updated 10/23/2008
Status Archive
Type General Article