UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14486

*Obsolete* 4.2i BitGen - BitGen fails to generate block RAM frames for a Virtex-II in Partial Reconfig mode and reports "ERROR: Bitgen:223..."

Description

Keywords: BitGen, Virtex-II, partial reconfiguration, BRAM

Urgency: Standard

General Description:
When I run BitGen on a Virtex-II in Partial Reconfig mode, block RAM frames are not generated, and the following error message occurs:

"Writing out a partial bit stream for module lcd_driver.
ERROR:Bitgen:223 - Extracted invalid range 18-18 from MULT18X18_X0Y1:MULT18X18_X0Y0."

Solution

This problem is fixed in the latest 4.2i Service Pack, available at:
http://www.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.2i Service Pack 2.
AR# 14486
Date Created 08/29/2007
Last Updated 09/26/2005
Status Archive
Type ??????