UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14774

4.1i sp2 ECS - Copying and pasting a design generates unwanted connections and "Fatal_Error:GuiUtilities:WinApp.c.570:$Revision"

Description

Keywords: copy, paste, ECS, schematic

Urgency: Standard

General Description:
When I copy and paste large sections of a schematic design, I receive unwanted connections that were not in my original design. If I fix these connections, the following fatal error is reported:

"Fatal_Error:GuiUtilities:WinApp.c.570:$Revision"

Solution

This problem is fixed in the latest 4.2i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.2i Service Pack 3.
AR# 14774
Date Created 05/29/2002
Last Updated 08/12/2003
Status Archive
Type General Article