We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14985

5.1i Timing Analyzer/TRCE - Analyzing against user-defined endpoints reports previously defined endpoints


General Description:

When I use Analyze Against User Defined Endpoints in Timing Analyzer, it works fine the first time, but if I attempt to do another analysis with new endpoints without reloading the design, the tools use the previous endpoints in the analysis.

However, the summary at the bottom of the report shows the correct endpoints.


You can work around this problem by using the Analyze -> Reset All Path Filters menu item.

AR# 14985
Date 01/18/2010
Status Archive
Type General Article
Page Bookmarked