UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15065

Virtex-II Pro RocketIO - Is it possible to put the Tx pins into a 3-state condition?

Description

Is it possible to put the Tx pins into a 3-state condition?

Solution

The only way to put the Tx pins into a 3-state condition is to power down the transceiver.  

 

Note that it is possible to set the Tx pins to a Know state using the TXINHIBIT control signal (Txp=0, Txn=1).

AR# 15065
Date Created 09/03/2007
Last Updated 05/14/2014
Status Archive
Type General Article