We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15069

5.1i CPLD XC9500XL/XV - The "Terminate: Float" option does not create a JEDEC file with the bus-hold disabled


Keywords: 5.1i, CPLD, 9500XL, 9500XV, bus hold

Urgency: Standard

General Description:
When "I/O Termination: Float" is selected in the ISE software, the JEDEC file produced should have the bus-hold turned off for all pins in the device. However, when I select the "Float" option, the I/Os continue to be terminated with the bus-hold circuitry.


This problem is fixed in the latest 5.1i Service Pack, available at:
The first service pack containing the fix is 5.1i Service Pack 3.
AR# 15069
Date 03/21/2005
Status Archive
Type General Article
Page Bookmarked