We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15169

7.1i Incremental Design - When I use Project Navigator with XST, I should be able to resynthesize only the changed logic


Keywords: incremental, design, Project, Navigator, XST

When I run the Incremental Design flow with Project Navigator and XST, I should be able to resynthesize only the changed logic. In this case, Project Navigator recognizes that the changed logic group has a newer date than the top level and concludes that the project is not up to date. This causes problems, since ISE tries to rerun all applications when I select anything in the Process window.


To work around this issue, resynthesize the top level and the changed logic group each time you make a design change.
AR# 15169
Date 02/21/2007
Status Archive
Type General Article
Page Bookmarked