UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15174

5.1i CORE Generator - Distributed Memory: "#** Note: Compiled version of MEM_INIT_FILE_PACK_V3_1 does not support MIF generation" is reported during simulation

Description


General Description:

When I simulate my Distributed Memory core, the following message appears:



"# ** Note: Compiled version of MEM_INIT_FILE_PACK_V3_1 does not support MIF generation."

Solution


These warning messages can be safely ignored. They will be removed in the first IP update for the 5.1i software.



If you would like to suppress the messages and your simulator supports a "suppress warnings" feature, set your simulator to suppress warnings of level "NOTE":



For ModelSim 5.5x:



1. Select the Options menu.

2. Select "Simulation" from the list.

3. Select the Assertions tab in the pop-up window.

4. Check the box beside "Note" under the "Ignore Assertions For:" heading.

5. Click the "OK" button in the pop-up window.



For ModelSim 5.6x:



1. Select the Simulation menu.

2. Select "Simulation Options..." from the list.

3. Select the Assertions tab in the pop-up window.

4. Check the box beside "Note" under the "Ignore Assertions For:" heading.

5. Click the "OK" button in the pop-up window.



A similar error message has been generated in the 6.1i tools:



"# ** Note: Compiled version of MEM_INIT_FILE_PACK_V4_0 does not support MIF generation."



CR filed(179381).
AR# 15174
Date Created 09/03/2007
Last Updated 07/28/2010
Status Archive
Type General Article