We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15602

LogiCORE Gigabit Ethernet MAC/Tri-mode Ethernet MAC - How long is the time-out period for a Full System Hardware Evaluation license and what does a time-out look like?


General Description:

How long does the LogiCORE Gigabit Ethernet MAC or LogiCORE Tri-mode Ethernet MAC Core operate before timing out when using a Full System Hardware Evaluation license? What does a time-out look like?


Following configuration of the device, the Gigabit Ethernet MAC or Tri-mode Ethernet MAC Core will function correctly for approximately 8.5 hours. After this time, the core will cease to operate and block frames from passing through both the receiver and the transmitter. The only way to restore operation is to reconfigure the device; a simple core reset will not work.

When the core times out, all the buses will be inactive and all of the control signals on the receiver client side and transmitter GMII side interfaces will be held inactive.

AR# 15602
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked