UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15777

5.1isp1 Architecture Wizard - In the DCM general setup, the phase shift value resets to "0" when the "Advanced" button is used

Description

General Description: 

When I select the "Advanced" button in the DCM general setup dialog box; click on "OK", the phase shift value is reset to "0". If I cancel the "Advanced" dialog box, the phase shift value is restored.

Solution

If this issue occurs, reenter the required phase shift value in the "General Setup" dialog box. 

 

This problem is fixed in the latest 5.1i Service Pack, available at: 

http://support.xilinx.com/support/techsup/sw_updates  

The first service pack containing the fix is 5.1i Service Pack 2.

AR# 15777
Date Created 09/03/2007
Last Updated 05/08/2014
Status Archive
Type General Article