We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15986

5.1isp2 Floorplanner - DCM sites are mislabeled for Virtex-II devices in Floorplanner, and DCMs do not appear in the placement view


Keywords: Floorplanner, DCM, label, Virtex-II, missing, show, placement

Urgency: Standard

General Description:
DCM sites are being mislabeled my Virtex-II device in Floorplanner, and DCMs are not appearing in the placement view window.


The problem is that, for several Virtex-II parts, the DCMs are labeled as X0Y0, X2Y0, X4Y0 and X6Y0 in Floorplanner. However, in FPGA Editor, they are labeled as X0Y0, X1Y0, X2Y0 and X3Y0.

To work around this problem, use the UCF to manually LOC DCMs to the correct locations and verify the implementation with FPGA Editor.

This problem will be fixed in the next major software release.
AR# 15986
Date 03/06/2005
Status Archive
Type General Article
Page Bookmarked