We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16258

5.1i WebPACK Install - An error occurs when I attempt to install the second CD


Keywords: WebPACK, CD, install, installation, 5.1i, ISE, device, files, disk, 2, disc

I am using a WebPACK registration ID; when I install the second CD, a Product Registration ID error is reported, and the installation exits.


This problem occurs when a WebPACK registration ID is used with a standard ISE 2-CD installation package. The WebPACK CD installation is included on the Design Environment CD (Disc 1 of 2), which is indicated when it is distributed in a WebPACK package.

You can use a WebPACK Registration ID with a standard ISE 2-CD package by using only CD Disc 1 of 2. You will receive all supported device families that are included in WebPACK.

A complete list of the device families that are supported for 5.1i WebPACK is available at: http://support.xilinx.com/ise/products/webpack_config.htm.
AR# 16258
Date 04/28/2006
Status Archive
Type General Article
Page Bookmarked