UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16317

5.1isp3 iMPACT - iMPACT is unable to detect the MultiPRO cable and reports "Configuration Mode not supported by the selected download cable"

Description

Urgency: Hot

General Description:

When iMPACT attempts to detect a MultiPRO cable, the following error message is reported:

"Configuration Mode not supported by the selected download cable."

iMPACT is unable to connect to the MultiPRO cable.

Solution

A patch is available to correct this problem. This patch must be applied only to the 5.1i software with Service Pack 3. (5.1i Service Pack 3 is available at: http://support.xilinx.com/support/techsup/sw_updates.)

Download the archived patch at the link below and follow the instructions in the included README file:

http://www.xilinx.com/txpatches/pub/swhelp/ise5_updates/16317.zip

AR# 16317
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article