UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16353

5.1i Virtex-II MAP - "FATAL_ERROR: Map:Portability/export/ Port_Main.h:126:1.22 "

Description

Keywords: crash, start, PC, portability

Urgency: Hot

General Description:
On my PC, MAP reports a fatal error and crashes after printing the message "Using target part ...":

"Release 5.1.02i - Map F.25
Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.
Using target part "2v6000bf957-4".
FATAL_ERROR:Map:Portability/export/Port_Main.h:126:1.22

NOTE: This Answer Record is only a good match for your case if the failure occurs immediately after the "Using target part ..." message.

Solution

This PC-only problem was fixed in the 6.1i software release.

You can also avoid this issue by setting the following environment variable:

SET XIL_MAP_SIM_RECURSION_LIMIT=10

NOTE: In the 5.2i design tools, certain XC2V6000 designs do not respond to the work-around until the variable is set to "4".
AR# 16353
Date Created 12/11/2002
Last Updated 05/11/2006
Status Archive
Type General Article