We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16543

7.1i XST - XST is not recognizing the "-use_carry_chain" switch in my script file


Keywords: VHDL, Verilog, directive, attribute

Urgency: Standard

General Description:
XST does not recognize the "-use_carry_chain" switch as described in the Constraints Guide.


This is an error in the Constraints Guide. You can only use the "use_carry_chain" directive in VHDL, Verilog, or XCF.
AR# 16543
Date 10/20/2005
Status Archive
Type General Article
Page Bookmarked