We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16566

LogiCORE CAM v3.0 - CORE Generator hangs while generating a CAM v3.0 Core


General Description:

I am generating a CAM Core with the "Load Initialization File" selected. I did not specify the file name, or perform a "Load Coefficient" process, and CORE Generator hangs in the following manner:

1. An error message reports "File not found".

2. If I click on "OK" in the error message box, a new message states "Generating... please wait". This message remains on the screen indefinitely.

3. At this point, the Cancel button does not work, and the only way to close CORE Generator is to kill it via Windows Task Manager.


This problem occurs if you select "Load Initialization File" but do not specify the COE file name or perform the "Load Coefficients" process.

To avoid this problem, specify your COE file if it is needed.

The issue that causes CORE Generator to hang will be resolved in the next version of the CAM core, which will be released with IP Update #2.
AR# 16566
Date 07/28/2010
Status Archive
Type General Article