UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17355

LogiCORE Ten Gigabit Ethernet XAUI v3.0 - TYPE_SEL port incorrectly shows up when using the configuration/status vector interface

Description

Keywords: Ethernet, XAUI, F_IP4, TYPE_SEL, MDIO, configuration, status, vector

Urgency: Standard

General Description:
When generating the XAUI v3.0 core with the configuration/status vector interface, the TYPE_SEL port is incorrectly listed as a port.

Solution

The TYPE_SEL port is only required when the MDIO interface is implemented. Consequently, when using the configuration/status vector interface, the TYPE_SEL port has no effect.

This will be removed in a future release. To work around this issue, simply leave the port unconnected in your design.
AR# 17355
Date Created 05/30/2003
Last Updated 08/31/2006
Status Archive
Type General Article