We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17387

5.2i Data2BRAM - When I use BitGen with the -bd switch, the block RAM is initialized incorrectly


General Description:

When I use BitGen (with the -bd switch), the block RAM is not initialized correctly in the generated bit file. However, when I use Data2BRAM in stand-alone mode, the block RAM appears to be initialized correctly.


This problem has been fixed in the latest 6.1i Service Pack, available at:

The first service pack containing the fix is 6.1i Service Pack 1.

AR# 17387
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked