UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18474

6.1 EDK - Steps required to rev up the UC design from EDK3.3.3/ISE5.2 -> EDK6.1/ISE6.1

Description

Keywords: Ultra Controller, UC, EDK, ISE, revup, rev up

Urgency: Standard

General Description:
What are the required steps to rev up the 3.2 EDK Ultra-Controller Design?

Solution

Steps for design rev-up:

0. Download, Extract UC (e.g., "uc_4i_4d_1ppc_vlog.zip")

1. Rev-Up in EDK 6.1i. Leave EDK Window Open.

2. Rev-Up in ISE 6.1i. Leave ISE Window Open.

3. In ISE 6.1i "Source in Project" window, Select first item underneath the system (..\hdl\system.v)
- This should be dsbram_ifcntlr_1_wrapper(..\hdl\system_bb_comps.v).
- After selecting this, Remove it from the project by right-clicking and selecting Remove.
- Answer "Yes" to remove all source dialog box.
- Leave ISE Window Open.
- SAVE Project (overwrite the "npl" file).

4. Go to EDK window.
- Run: Tools -> Program Compile Sources.
- Run: Tools -> Generate Netlist.

5. Go to ISE window.
- Run: View -> Refresh.
- Icons representing wrapper files underneath system should change from a question mark to a check mark.

6. In the ISEs "Sources in Project" window, select "UltraController_Demo(uc_4i_4d.v)"
- Move to the "Processes for Source..." window and double-click "Generate Programming File".
AR# 18474
Date Created 11/21/2003
Last Updated 03/07/2006
Status Archive
Type General Article