UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18821

6.2i Install - During/After the installation of ISE, the following system error occurs: "Object name already exists"

Description

Keywords: cable, driver, ISE

When I install ISE 6.x, an "Object name already exists" system error occurs during and/or after the installation of the MultiLINX Cable drivers. Rebooting does not resolve the issue.

Solution

1

If the problem occurs only during the ISE installation, click "OK" and safely ignore this error.

2

If the problem occurs after the software is installed, you might need to remove duplicate installed cable drivers from the Windows 2000/XP Device Manager. To remove the duplicate driver, follow these steps:

1. Open the System Properties dialog box from the Control Panel.
2. Click the Hardware tab.
3. Under the Device Manager section, click the Device Manager button.
4. Under the Jungo section, remove any duplicate icons.

AR# 18821
Date Created 01/22/2004
Last Updated 04/27/2006
Status Archive
Type General Article