We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 18829

6.1i System Generator for DSP and ModelSim - Warning message "No default binding for component: ..." occurs for the COREGen cores in my design during a behavioral simulation in ModelSim


General Description: 

When performing a behavioral simulation in ModelSim, a warning message similar to the following occurs for the COREGen cores in my design:  


"WARNING[1]: xlmult_tb_mult.vhd(261): No default binding for component: "multiplier_virtex2_6_0_9923652091c8ef39". (No entity named "multiplier_virtex2_6_0_9923652091c8ef39" was found)"


You can safely ignore this warning. This warning message occurs because there are two instantiations of the core, one is used for synthesis and the other is used for simulation. ModelSim processes the synthesis instantiation first and issues this warning; after this it processes the simulation model and continues with simulation.

AR# 18829
Date 05/16/2014
Status Archive
Type General Article