We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19059

ModelSim (MXE, SE, PE), Project Navigator - My simulation didn't run long enough. How do I change the default simulation time?


General Description: 

When running a simulation from Project Navigator, the default simulation time is 1000 ns. How can I make the simulation run longer and/or change the default run time?


To change the default simulation time, right-click the Simulate process in the Processes window, select Properties, and then change the Simulation Run Time property. 


After the simulation is running, the simulation can be run for additional lengths of time by clicking the run icon or by typing the run command at the ModelSim command prompt. For example: 

VSIM> run 100 ns 


For additional information about running a simulation from Project Navigator, please see (Xilinx Answer 18216).

AR# 19059
Date 05/16/2014
Status Archive
Type General Article
Page Bookmarked