UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19367

LogiCORE FIFO Generator v1.1- In the GUI, I cannot change the component name and data width fields

Description

General Description: 

When trying to customize or edit the GUI parameters, I cannot always change the editable fields after I have started parameter selection. When I click on the editable field, there is no cursor, and I cannot type in any information. The affected fields are as follows: 

 

Component Name  

Input Data Width 

Read Data Count Width 

Write Data Count Width

Solution

To work around this issue, try one of the following: 

 

- Close the GUI, re-open, and repeat the parameter selection. 

- Go to another GUI page and modify other parameters, go back to the previous page, and see if you can edit the component name field.

AR# 19367
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article