AR# 19578

|

6.2i ChipScope Pro - XCF00P/Platform Flash in chain gives 0 core units found by ChipScope Analyzer

Description

General Description:

If a XCF08/16/32P is in a JTAG chain, ChipScope cannot initialize the chain as it has no idea of what the instruction register length is. It will try to recognize the device as a XC18V00, but the instruction register is too small (8 bits). The parallel Platform Flash devices are 16 bits.

Solution

To work around this issue, edit the "%XILINX%\ChipScope_Pro_6_2i\data\deviceid.lst" and add the following 2 lines:

C,505,93=XCF00P

XCF00P=10

AR# 19578
Date 12/15/2012
Status Active
Type General Article
People Also Viewed