We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20302

LogiCORE SPI-4.2 (POS-PHY L4) v7.1 - When opening SPI4.2 GUI, I receive a pop-up message indicating that core will operate for 6-8 hours before Hardware Timeout


When opening the SPI4.2 GUI in COREGen using the Hardware timeout evaluation license, I receive a pop-up message. The message indicates that the core will last for 6-8 hours before Hardware Timeout.


This is incorrect. The core will only remain operational for 2 hours at most before the Hardware Timeout takes place.
AR# 20302
Date 05/16/2014
Status Archive
Type General Article
  • ISE - 9.1i
  • ISE Design Suite - 12.2
  • ISE Design Suite - 11.1
  • ISE - 10.1
  • SPI-4 Phase 2 Interface Solutions
Page Bookmarked