We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20878

Virtex 4 Configuration Users Guide - pullup values not given for done


General Description:

Figure 2-3 on page 23 and later pages show pullups on the done pin but does not indicate what the value of this pullups


The pullup value should be 330 ohms to ensure DONE pin transitions high within one startup clock cycle.

AR# 20878
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked