UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20915

Config-Cables - When Platform Cable USB is disconnected from the board and reconnected, the Status LED goes out and does not re-illuminate

Description

General Description: 

When I disconnect the Platform Cable USB from the board and reconnect it, the Status LED goes out and does not re-illuminate. Using iMPACT to perform any operation results in no action.

Solution

 

To work around this problem, disconnect the cable from the computer and reconnect.

AR# 20915
Date Created 09/03/2007
Last Updated 05/19/2014
Status Archive
Type General Article