UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21438

LogiCORE PCI - 7.1i IP Update 1 CORE Generator is not allowing users to recustomize the PCI 32-bit Core

Description

General Description: 

When using an evaluation license and generating a PCI 32-bit Core, I cannot recustomize this core by clicking it in the Generated IP tab. The following errors occur: 

 

ERROR:sim:5 - Could not remove directory C:<project path>\tmp\_cg\_bbx\v3.0.145\vhdl\src\ucf. 

ERROR:sim:5 - Could not remove directory C:\<project path>\tmp\_cg\_bbx\v3.0.145\vhdl\src. 

ERROR:sim:5 - Could not remove directory C:\<project path>\tmp\_cg\_bbx\v3.0.145\vhdl. 

ERROR:sim:5 - Could not remove directory C:\<project path>\tmp\_cg\_bbx\v3.0.145. 

ERROR:sim:5 - Could not remove directory C:\<project path>\tmp\_cg\_bbx. 

ERROR:sim:4 - Could not create clean working directory C:\<project path>\tmp\_cg. 

 

Also, a pop-up box also states: 

 

"An error has occurred during operation"

Solution

To work around this issue, close CORE Generator and re-open it. At that point, load the project file (*.cgp). Once this is done, you can click the previously generated core to recustomize.

AR# 21438
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article