UPGRADE YOUR BROWSER
We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
The 9500 report file contains a section for each Function block
including the signals used by the function blocks.
This section consists of a grid containing Xs and @s
What do these characters mean?
Both X and @ indicate that the MC output signal uses the input
signal coresponding to the grid location.
X- Indicates an input signal which used one of the the 36 standard
Function block inputs from the Fast connect matrix.
@- Indicates an input signal which uses the wire-anding capability
of the switch matrix in order to be routed to the Function Block.
In the example below, the signal "out" uses 32 inputs. One of the
inputs, R20.PIN, uses the wire-and capability
Signals Used by Logic in Function Block
1: D0 14: IN 27: OUT_EN9 40: num
2: D9 15: NORM 28: R20.PIN
. . .
. . .
.
13: EN 26: OUT 39: R9.PIN
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
q1 X...XX...XXXXXX.....XXX..X.............X 14 14
q2 .X..X.X................................. 3 3
out XXXXXXXXX......XXXXXX.XXX.XXXXXXXXXXXX@X 32 31
BA9 ..XX....X.....................XXXXXX@@X. 12 10
0----+----1----+----2----+----3----+----4
AR# 2217 | |
---|---|
Date | 05/07/2014 |
Status | Archive |
Type | General Article |