We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22575

8.1i ISE - When I try to open a CDC file from Library View, Project Navigator reports "ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "0"'


Keywords: ChipScope

The following error appears in the Transcript window when I open a CDC file from the Library tab view of Project Navigator.

ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "0"'.
Tcl_ErrnoId: unknown error
Tcl_ErrnoMsg: No error
_cmd: ::xilinx::Dpm::dpm_chSNEditOperationWithUpdate $piThisInterface
errorInfo: invalid command name "0"
while executing
"$_iSourceDUNode GetViewContext _IView"
(procedure "dpm_chipscopeEditCdc" line 53)
invoked from within
"$_sEditor $_sFilePath $_iDUInstance $_iDesign $_iSourceDUNode $_editMode "
(procedure "dpm_chDUEditOperation" line 28)
invoked from within
"dpm_chDUEditOperation $_iInterface"
(procedure "::xilinx::Dpm::dpm_chSNEditOperationWithUpdate" line 14)
invoked from within
"::xilinx::Dpm::dpm_chSNEditOperationWithUpdate $piThisInterface"


To open the CDC file, please open the Sources view in Project Navigator and open the CDC file from there.

This problem has been fixed in the latest 8.1i Service Pack available at:
The first service pack containing the fix is 8.1i Service Pack 1.
AR# 22575
Date 03/26/2008
Status Archive
Type General Article
Page Bookmarked